New details about the Canon 250 Megapixel APS-H sensor

We got some additional technical details about that crazy Canon 250 Megapixel APS-H sensor presented by Canon on September 7. Harvest Imaging reports from the ISSCC meeting:

Hirofumi Totsuka of Canon presented a 250 Mpixel APS-H size imager : 1.5 um pixel pitch (4 sharing) made in 0.13 um technology node. The device is consuming 1.97 W at full resolution 5fps. An interesting build-in feature of this sensor is the following : ALL pixel signals are converted by column SS-ADCs with a single ramp, but in front of the ADC, each column has its own PGA that can be switched to 4x or 1x gain, depending on the signal level. So when the pixels are sampled, a first check is done to look whether the signal is above or below a particular reference level, and then the right gain of the PGA is set to 1x or 4x. Simple method, but I think that the issues pop up in the reconstruction of the signal at the cross-over point between the two settings of the PGA.

The camera prototype used to fit the new sensor was a mirrorless box. Wondering if Canon is going to use that sensor in a future “serious” mirrorless camera.